Rewrite attempt number two. Now using array lists of audio chunks, with
each chunk having its format and optionally losslessness stashed along
with it. This replaces the old virtual ring buffer method. As a result
of this, the HRIR toggle now works instantaneously.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
After all this rewriting, down or upmixing the audio is now handled with
the lowest latency possible, meaning that toggling the HRIR option now
takes effect immediately.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This is a fixed point implementation identical to Microsoft's original
algorithm. Or at least I assume it's Microsoft's. It was actually
adapted from hdcd_decode.exe, which was adapted from somewhere else.
It's entirely in fixed point math now, so it's fairly deterministic.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The end of input queueing, which can go nuts when there are a lot of
short files, should be terminated when the user asks the player to stop.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Flush the resampler when the source file terminates, so that it outputs
delayed samples properly. This fixes gapless decoding of resampled
files.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Replace individual virtual buffers with large _mm_malloc blocks at a
time, then dole out chunks of those buffers as the nodes need them.
Should reduce memory contention a little bit.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This seals up a major memory leak of the playback state whenever a chain
is released on stop or on manual track change. CogAudioMulti was
retaining the input node due to its listeners, and InputNode was not
releasing the listeners when asked to stop running. This is fixed now.
Fixes#221
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Added a logging method that indicates starting playback of a given URL,
and added a debug build only logging of every metadata load event.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
7.0 downmix was passing parameters to cblas_scopy backwards, and WAV
files report "host" endian, not "native".
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The thread wait on shutdown had the potential to lock up waiting for the
thread to shut down. Now it should at least spam the semaphores, so that
the thread should progress to shutdown a lot quicker.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Add a safety fix for pausing and shutting down, so that we don't call
into AUAudioUnit's stopHardware function unless the stream has already
been started by the output.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This should fix some coding issues, and also fix some potential memory
leaks in the file verifier, assuming it didn't already release the
files it was pulling the stats from.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The filter wasn't properly freeing its FFT setup state, and also was
unnecessarily null checking the pointers before passing them to the
aligned free function, which already does null checking.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Reduce the timing at which an end of file notification is sent to the
main thread from 16384 bytes to 8192 bytes. This may help with playback
of a lot of really small files, and skipping tracks.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Implement the ability to configure and select an HRIR preset to use with
the HRIR filter, or remove the preset. It will validate the file's
usefulness before setting it for the player to use.
Also, fixed back center channel filtering for 7.0 format audio.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This is needed for HeSuVi no-echo impulses, which are only one channel
per input channel, and mapping uses symmetrical mirroring of the input
set to create the surround effect, since there's no side-to-side delay
in these impulses.
This new virtualizer uses the Accelerate framework to process samples.
I've bundled a HeSuVi impulse for now, and will add an option to select
an impulse in the future. It will validate the selection before sending
it to the actual filter, which outright fails if it receives invalid
input. Impulses will be supported in any arbitrary format that Cog
supports, but let's not go too hog wild, it requires HeSuVi 14 channel
presets.
